background image

3

1-WARNINGS AND WARRANTY TERMS

Technical Dept. - All rights reserved - Reproduction is prohibited

INFORMATION:

Please contact the retailer or qualified personnel authorised by the company to resolve a problem.

• 

You must only use the fuel specified by the manufacturer.

• 

Check and clean the smoke extraction pipes regularly (connection to the chimney).

• 

Always keep the cover of the fuel hopper closed.

• 

Store this installation and use manual with care as it must accompany the product for the duration of its useful life. If the product is 

sold or transferred to another user, ensure the manual is also handed over.

INTENDED USE

The product only works with wood pellets and must be installed indoors.

WARRANTY CONDITIONS

The company guarantees the product, 

with the exception of elements subject to normal wear

 listed below, for a period of 

2 (two) 

years 

from the date of purchase attested by:

• 

a document to serve as proof of purchase (invoice and/or receipt) that shows the name of the vendor and the date on which the 

purchase was made;

• 

forwarding of the completed certificate of guarantee within 8 days of purchase.

Furthermore, in order for the guarantee to be valid, the device must be installed and calibrated by qualified personnel, and where 

necessary, the user must be issued with a declaration of conformity and correct functioning of the product.

We suggest performing the product function test before completing the finer calibrations. 

Any installation that fails to comply with the regulations in force will invalidate the product guarantee, as will improper use or failure to 

carry out the maintenance prescribed by the manufacturer.

The guarantee is valid on the condition that the instructions and warnings contained in the use and maintenance manual are observed, 

and therefore the product is used correctly.

The replacement of the entire system or the repair of one of its components does not extend the guarantee period, and the original expiry 

date remains unchanged.

The guarantee covers the replacement or free repair 

of parts recognised as being faulty at source due to manufacturing defects.

To benefit from the guarantee, in the event of a fault, the customer must have the guarantee certificate and present it with the proof of 

purchase document to the Technical Assistance Office.

rmed at all or as indicated by the manufacturer.

Содержание COMPACT 35

































































Отзывы: