RED COMPACT 35 Скачать руководство пользователя страница 49

Страница: 49 / 64

9-SAFETY DEVICES AND ALARMS

ALARM ALERTS

Whenever an operating condition other than that designed for the regular operation of the boiler occurs, there is an alarm condition.

The control panel gives information on the reason of the alarm in progress. A sound signal is not envisioned for alarms A01-A02 only so to

not disturb the user in the event of pellets running out in the hopper during the night.

Panel alert

Type of problem

Solution

A01

The fire does not ignite.

Check whether the brazier is clean / level of pellets in

the hopper.

A02

The fire goes off abnormally.

Check the level of pellets in the hopper.

A03

Thermostat alarms

The temperature of the pellets hopper or the

water temperature exceed the envisioned safety

threshold.

Wait for the cooling stage to end, cancel the alarm

and restart the boiler setting the fuel loading at

minimum (SETTINGS menu - Pellets recipe). If the

alarm persists, contact the service centre.

Check if the room fan works properly (if present).

A04

Smoke overheating.

The set smoke threshold has been exceeded. Reduce

pellets loading (SETTINGS menu - Pellets recipe).

A05

Pressure switches alarm

Smoke pressure switch intervention or water

pressure insufficient.

Verify chimney obstruction / door opening or

hydraulic system pressure.

A08

Abnormal smoke fan operation.

If the alarm persists, contact the service centre.

A09

Smoke probe faulty.

If the alarm persists, contact the service centre.

A19

Water probe faulty.

Water probe disconnected / interrupted / defective /

not recognised.

A20

Puffer probe alarm.

Puffer probe disconnected / interrupted / defective /

not recognised.

Service

Routine maintenance alert (it does not block

the system).

When this flashing message appears upon start-up, it

means that the preset operating hours have elapsed

before maintenance. Contact the service centre.

ALARM RESET

To reset the alarm one must press and hold key 1 (ESC) for a few seconds. The boiler performs a check to determine if the cause of the

alarm persists or not.

In the first case the alarm will still be displayed, in the second case it will go onto OFF.

If the alarm persists, contact the service centre.

Содержание COMPACT 35
































































Результаты поиска

Содержание COMPACT 35

Отзывы:

Похожие инструкции для COMPACT 35

Бренды по названию

Популярные бренды

RED COMPACT 35, Инструкция по установке и эксплуатации

Результаты поиска

Содержание COMPACT 35

Отзывы:

Похожие инструкции для COMPACT 35

Бренды по названию

Популярные бренды