26
Retouch Outline
If checked, engraves outline after finishing hatching.
It not, mark hatched only.
This option is recommended when
engraving large object
.
For small engraving like small text, better engraving quality can be made by
turning off this option.
Depth
Appoint cutting depth. Generally, because material may be bent and
inclined, only when you should appoint depth
0.1~0.2mm deeper
than cut
material’s thickness, you can perfectly cut it.
☞
Input plate thickness value measured at step 1 here. The actucal
depth must be
“plate thi 0.1mm”
to cut the plate entirely.
Z Pitch
Small cutter is easy to be broken. So thick material like over 1.0mm can’t
be cut at a tim
e. In this case, by setting “Z Pitch” value, the plate over
1.0mm can be cut.
“Z Pitch” value means the depth it cuts gradually each time.
For example, when set “Z Pitch” value, 0.3mm for 1.0mm-thick plate, it will
cut 4 times varying the depth to 0.3mm, 0.6mm, 0.9mm and 1.0mm each
time.
This can protect the cutter from breaking.
☞
Usually, 0.2mm pitch is recommended. And it must not
exceed 0.4mm for safer use of cutter.
Z Clearance
In moving other engraving position, life Z-axis in order that tool is not
contacted with material surface and then, move position. At this time,
appoint applied height
Z Dwell time
Rotation speed is lowered when tool is contacted with material. At this time,
if you move it, because there is the risk of tool damage, especially, in the
case of steel material, wait for a fixed time until spindle rotation speed is
recovered and move it. It can prevent tool from damaged. At this time, input
delay time.
Speed XY
Appoint XY-axis movement speed.
Speed Z
Appoint the speed that Z-axis is moved downward.
Transmit
Tool path output window is popped up.
