12
MAGIC-2 Operation
When turning on MAGIC-2, it performs self-diagnosis as following and if there is not any problem, it is in stand-
by condition with confirmation sound, short “beep-beep-beep”.
(1) Self-diagnosis order in power ON
1) If there is axis detected by sensor, it moves itself out of detection area
2) Check Z-axis sensor and return to origin
3) Check X-axis sensor and return to origin
4) Check Y-axis sensor and return to origin
5) Conformation sound and stand-by
(2) Operation Sequence
1) Turn on engraving machine
2)
Fix material on engraving machine’s vise
3) Run design software (provided together with product)
4) Design engraved pattern
5) Start engraving by pressing engraving button on program
