Red Panda RASTER 2 Скачать руководство пользователя | Manualshive

Страница: 40 / 43

background image

40

Warranty

ONE YEAR LIMITED MANUFACTURER’S WARRANTY

1.

Limited Warranty. For one (1) year following the date of purchase, Red Panda, LLC will repair or

replace, in its sole discretion, the Product, in order to correct defects in material or workmanship that
existed when the Product was purchased (collectively, “Manufacturing Defects”. For purposes of this
Limited Warranty, “Manufacturing Defects” includes only defects in the Product at the time of purchase
and does not include normal wear and tear, modification post-sale, misuse, accidental damage or de-
struction, or other abuse occurring after purchase.

2.

SOLE AND EXCLUSIVE REMEDY. THE REPAIR AND/OR REPLACEMENT OF THE PRODUCT SHALL BE

THE SOLE AND EXCLUSIVE REMEDY FOR MANUFACTURING DEFECTS. PROOF OF ORIGINAL PURCHASE
DATE IS REQUIRED TO RECEIVE REPAIR OR REPLACEMENT OF THE PRODUCT.

3.

DISCLAIMER OF IMPLIED WARRANTIES. IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WAR-

RANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. RED PANDA MAKES NO REPRE-
SENTATIONS REGARDING THE PERFORMANCE OF, THE QUALITY OR THE DURABILITY OF THE PRODUCT
OTHER THAN THOSE EXPRESSLY SET FORTH HEREIN.

4.

LIMITATION OF REMEDIES, EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES. THE

SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR RE-
PLACEMENT AS PROVIDED HEREIN. RED PANDA SHALL NOT BE LIABLE FOR ANY INCIDENTIAL OR CON-
SEQUENTIAL DAMAGES. Some states and countries do not allow this exclusion or limitation, so these
limitations and exclusions may not apply to you.

5.

Return and/or Replacement of Product due to a Manufacturing Defect. In the event of believed

manufacturing defect, you should contact Red Panda at [email protected], with the date of
original purchase, a copy of the receipt and a description of the asserted Manufacturing Defect. Red
Panda will, at its sole discretion, notify you to return the Product at the specified location or, alternatively
ship a replacement Product within thirty (30) days of receipt. You are solely responsible for the payment
of shipping costs and expenses to ship the Product to Red Panda. Red Panda will pay the cost of ship-
ping the repaired or replacement Product to you. If the Product is returned for service and/or repairs,
Red Panda will complete the repairs within sixty (60) days of receipt and ship the Product back to you.
The Product will be warranted for the remaining term of the original Product’s warranty period.

«
...
38
39
40
41
42
...
»

Содержание RASTER 2












































Отзывы:

Нет отзывов

Похожие инструкции для RASTER 2

Бренд: Teac Страницы: 22

Бренд: Radio Shack Страницы: 24

Бренд: M-Audio Страницы: 45

PedalVerb PDS3000

Бренд: DigiTech Страницы: 12

Бренд: Midas Страницы: 5

Бренд: Mission Страницы: 2

Soundcraft Vi2000

Бренд: Harman Страницы: 202

Бренд: IBM Страницы: 64

Бренд: Radial Engineering Страницы: 2

Бренд: T&M Страницы: 17

Бренд: Mission Страницы: 2

Бренд: Zoom Страницы: 6

Бренд: Zoom Страницы: 58

Бренд: HECKLER Страницы: 7

Бренд: Gemini Страницы: 6

Бренд: Gemini Страницы: 12

Бренд: Denon Страницы: 40

Бренд: Denon Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды