Choose a good, cleared assembly area and get a friend to help you put your gas fire pit together. Lay
cardboard down to protect gas fire pit table top finish and assembly area.
Step 1
Place the Table Top (A) upside down to the soft,
level surface. Attach Control Panel (B) to the
Table Top (A) with (2) M5 x 10 bolts (AA) as
illustrated.
Insert valve into injection pipe of burner firmly.
(Position A)
Insert the end of electrode wire into valve and
prevent it from falling off. (Position B)
Connect thermocouple to the Valve. (Position C)
Step 2
Attach the Protective Rod (H) to the Table Top
(A) with (2) M5 x 10 bolts (AA) as shown.
ASSEMBLY INSTRUCTIONS
Warning : Do not install the table on a hard, unclean or foreign body surface to
avoid scratches on the table top!
Page 8 of 19
