CLEANING AND MAINTENANCE
:
To enjoy years of outstanding performance
from your gas fire pit, make sure you
perform the following maintenance activities
on a regular basis:
•
Keep exterior surfaces clean.
•
Use warm soapy water for cleaning. Never use
flammable of corrosive cleaning agents.
WARNING
FORYOUR SAFETY
DO NOT touch or move
gas appliance for at least
45 minutes after use.
Allow all burner elements
to cool before touching.
FOR YOUR SAFETY ;
•
While washing your unit, be sure to keep the area around the burner dry at
all times. If the gas control is exposed to water in any way, do NOT try to
use it. It must be replaced.
•
Keep the appliance area free and clean from
combustible materials, gasoline and other
flammable vapors and liquids; not obstructing
the flow of combustion and ventilation air;
keeping the ventilation opening(s) of the
cylinder enclosure free and clear from debris .
•
The hose assembly must be replaced prior to
the appliance being put into operation if
there is evidence of excessive abrasion or
wear, or if the hose is damaged .
•
The replacement hose assembly shall be that
specified by the manufacturer.
•
At least once a year, the unit should be inspected for the presence of spiders,
spider webs or other insects .
•
Air flow must be unobstructed. Keep controls, burner, and circulating air
passageways clean. Signs of possible blockage include
：
Gas fire pit does NOT reach the desired temperature .
Gas fire pit glow is excessively uneven .
Gas fire pit makes popping noises .
•
Spiders and insects can nest in burner or orifices. This dangerous condition
can damage gas fire pit and render it unsafe for use. Clean burner holes by
using a heavy-duty pipe cleaner. Compressed air may help clear away smaller
particles.
NOTE:
In a salt-air environment such
as near an ocean corrosion
occurs more quickly than
normal. Frequently check for
corroded areas and repair
them promptly.
NOTE:
Wait until gas appliance is cool
before covering.
Page 17 of 19
