NOTE:PLEASE READ THE FOLLOWING SAFETY RULES
When an appliance is for connection to a fixed piping system, the installation must conform
with local codes, or in the absence of local codes with the National Fuel Gas Code, ANSI
Z223.1 • NFPA 54; National Fuel Gas Code; Natural Gas and Propane Installation Code, CSA
B149.1; or Propane Storage and Handling Code, CSA B149.2, as applicable;
This appliance requires 20 lb (9 kg) LP gas supply cylinder.
The burner must be replaced prior to the appliance being put into operation if it is evident
that the burner is damaged. The replacement burner shall be that specified by the
manufacturer.
Installation and repair should be done by a qualified service person. The appliance should be
inspected before use and at least annually by a qualified service person. More frequent
cleaning may be required as necessary. It is imperative that control compartment, burners,
and circulating air passageways of the appliance be kept clean.
Always place the appliance on a firm and level surface.
Do not burn solid fuels in this gas appliance.
Use the appliance outdoors in a well-ventilated space only, not in a building, garage, or any
other enclosed area.
When using the appliance, keep the appliance area clear and at least 50 inches from
combustible materials, gasoline and other flammable liquid and vapors. Certain items or
materials, when stored under the appliance or nearby, will be subjected to radiant heat and
could be seriously damaged.
Inspect the gas connections of appliance prior to each use. Do not operate the unit if there
is gas leak. A qualified service person should inspect the appliance annually.
Alert children and adults to the hazards of high surface temperatures and keep them away
to avoid burns or clothing ignition.
Carefully supervise children and pets when they are near the appliance.
Replace and guard or other protective device removed for servicing.
Do not hang clothing or other flammable materials on or near the appliance.
Do not use the appliance if any part has been under water. Immediately call a qualified
service technician to inspect the appliance and to replace any part of the control system and
any gas control which has been under water.
The LP-gas supply cylinder to be used must be: Constructed and marked in accordance with
the Specifications for LP-gas cylinders of the U.S. Department of Transportation (DOT); or the
Standard for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and
Commission, CAN/CSA-B339, as applicable
The LP-gas supply cylinder to be used must be provided with a listed overfilling prevention
device; and provided with a cylinder connection device compatible with the connection for
the appliance.
Use only a cylinder supply system arranged for vapor withdrawal, and the cylinder must
include a collar to protect the cylinder valve.
WARNINGS AND CAUTIONS
Page 4 of 19
