red lion PAXCK, Руководство пользователя

Страница: 15 / 32

-15-
Released 2018-05-15 Bulletin No. PAXCK-J
Drawing No. LP0524
Module 3 is the programming module for setting the Display Lock-out
Parameters and the “Quick Programming Mode” Value Access Parameters.
In the Quick Programming mode, after the PROGRAM LOCKOUT
PARAMETERS and before the Security Code (

), a Display Intensity
Level (

) parameter is available when the security code is non-zero. It
allows the display intensity to be set to 1 of 16 levels (0-15).
DISPLAY LOCK ‐ OUT PARAMETERS
When operating in the Display Mode, the meter displays can be viewed
consecutively by repeatedly pressing the DSP key. The annunciators to
the left of the display indicate which display is currently shown. Timer
(TMR), Cycle Counter (CNT), or Date (DAT). The Time Display for the
Real-Time Clock is shown with no annunciator. Any of these displays can
be locked from view with the DISPLAY LOCK-OUT parameters. Using
these parameters, each display can be programmed for “Read” or “Lock”
defined as follows:
TIMER DISPLAY LOCK ‐ OUT
CYCLE COUNTER DISPLAY LOCK ‐ OUT
These displays can be programmed for

or

. When a particular
meter function is not used, the Display Lock-out should be set to

for
that display.
PROGRAM LOCK ‐ OUT PARAMETERS (VALUE ACCESS)
“Full” Programming Mode permits all parameters to be viewed and
modified. This programming mode can be locked with a Security Code
and/or a User Input. When locked, and the
PAR key is pressed, the meter
enters a Quick Programming Mode. In this mode, access to Setpoint
Values, Timer & Cycle Counter Start/Stop Values, and Time Setting for
the Real-Time Clock can be programmed for “Read”, “Enter”, or “Lock”
defined as follows:
SETPOINT 1 to 4 VALUE ACCESS ** (

= 1 THRU 4)
Setpoint Values for SP1 thru SP4 can be programmed for

,

, or

.

and

are only displayed when they apply to the Setpoint
Action (

) programmed for that particular Setpoint. (See Module 6 for
details.)
TIMER & CYCLE COUNTER START/STOP VALUE ACCESS
Timer & Counter Start/Stop Values can be programmed for

,

, or

.


This parameter can be programmed for

or

. Selecting

allows
setting or changing the RTC Time in Quick Programming mode.
SECURITY CODE

to

Entry of a non-zero value will cause the

prompt to appear when
trying to access the “Full” Programming Mode. Access will only be
allowed after entering a matching security code or the universal unlock
code of 222. With this lock-out, a User Input would not have to be used for
the Program Lock-out function. Note however, the Security Code lock-out
is overridden when an User Input, configured for Program Lock-out (

),
is not active (See Chart.)
PROGRAMMING MODE ACCESS
Throughout this bulletin, Programming Mode (without Quick in front) always refers to
“Full” Programming.
SELECTION DISPLAY DESCRIPTION
Read

Not visible in Display Mode
Lock

Visible in Display Mode
SELECTION DISPLAY DESCRIPTION
Read  Visible, not changeable, in Quick Programming Mode
Enter  Visible and changeable, in Quick Programming Mode
Lock

Not visible in Quick Programming Mode
PAXCK: REAL ‐ TIME CLOCK DATE/TIME DISPLAY LOCK ‐ OUT
































SECURITY
CODE
USER INPUT
SELECTION
USER INPUT
STATE
MODE WHEN PAR
KEY IS PRESSED FULL PROGRAMMING
MODE ACCESS
0
not

———— Full Programming Immediate access
not 0
not

———— Quick Programming
After Quick Programming
with correct Security
code entry
not 0

Active Quick Programming
After Quick Programming
with correct Security
code entry
not 0

Not Active Full Programming Immediate access
0

Active Quick Programming No access
0

Not Active Full Programming Immediate access




















PAXCK: REAL ‐ TIME CLOCK DATE/TIME DISPLAY LOCK ‐ OUT








6.3 MODULE 3 ‐ DISPLAY ASSIGNMENT AND PROGRAM LOCK ‐ OUT PARAMETERS (

)
-0$
SU$U SU$E
41O
RTC Time
Display
Lock-out
RTC Date
Display
Lock-out
Setpoint **
On Value
Access
Cycle Counter
Display
Lock-out
Setpoint **
Time-out
Value Access
Setpoint **
Off Value
Access
UE41
Timer
Display
Lock-out
PAR
$E41
410'O U06UO
1SP
Security
Code
Timer Start
Value Access
U4USU
Timer Stop
Value Access
U4U01
Cycle Counter
Stop Value
Access
$4U01
Cycle Counter
Start Value
Access
$4USU
RTC Time
Set Access
4&UU $0E&
PAXCK
ONLY
PAXCK
ONLY
PAXCK
ONLY
PARAMETER MENU

= Setpoint Number 1 thru 4
** These parameters only appear if a Setpoint option card is installed.