red lion C48C, Инструкция по эксплуатации

Страница: 44 / 56

1.
DISPLAY:
2 Line by 6 digit LCD display. Positive image reflective or
negative image transmissive with red (top line) and green (bottom line)
backlighting
Main Display : 0.3” (7.62 mm) high digits
Secondary Display
: 0.2” (5.08 mm) high digits
Annunciator s:
Value : PRS, 1, 2, and 3
Output : 01, 02, and 03.
2.
POWER REQUIREMENTS
:
AC Versions (C48CXX0X):
AC Power : 85 to 250 VAC, 50/60 Hz, 9 VA max.
DC Power : 11 to 14 VDC @ 150 mA max. (Non PNP output models)
Note: AC Versions with PNP outputs cannot be powered from DC.
DC Versions (C48CXX1X):
CONTINUOUS :
DC Power : 18 to 36 VDC; 5.5 W max.
AC Power
: 24 VAC ± 10%; 50/60 Hz; 7 VA max.
Note: The +10% tolerance range on AC input voltage must be strictly
adhered to. DO NOT EXCEED 26.4 VAC.
PEAK (START-UP CURRENT)
:
AC or DC Power : 500 mA peak start-up current for 10 msec max.
3. MEMORY : Nonvolatile E
2
PROM retains all programmable parameters and
count values.
4.
SENSOR POWER
: +12 VDC ( ± 15%) @ 100 mA max.
5. COUNT INPUTS A & B : Accepts count pulses from a variety of sources,
DIP switch selectable.
Current Sourcing : 3.9K Ω pull-down, V
IN
max = 30 VDC
Current Sinking
: 7.8K Ω pull-up to 12 VDC; I
SNK
= 1.8 mA max.
Debounce : 50 Hz max.
Lo Bias : V
IL
= 1.5 VDC max., V
IH
= 3.75 VDC min.
Hi Bias : V
IL
= 5.5 VDC max., V
IH
= 7.5 VDC min.
6.
USER INPUTS
: Configurable as current sinking (active low) or current
sourcing (active high) inputs via a single plug jumper.
Current Sinking : V
IL
= 1.5 VDC max, 22 K Ω pull-up to 5 VDC.
Current Sourcing : V
IH
= 3.5 VDC min., V
IN
max = 30 VDC; 22 K Ω pull-
down.
Response Time = 10 msec max.
Inhibit Response Time = 250 µ sec max.
-38-
APPENDIX “B” - SPECIFICATIONS AND DIMENSIONS
13 14
12 11
10
9
8
7
6
5
4
3
2
1
(49.5)
(49.5)
1.95
1.95
4.17 (105.9) 0.37
(9.4)
(44.7)
1.76
1.76 (44.7)
1.772
(45 )
1.772
(45 )
+0.024
-0.000
+0.6
-0.0
+0.024
-0.000
+0.6
-0.0
F1
RST
2 1 3
S R P
3 0
2 0
1 0
PANEL CUT-OUT
DIMENSIONS In inches (mm)