red lion C48C, Инструкция по эксплуатации

Страница: 17 / 56

The front panel bezel material is flame and scratch resistant, textured plastic
with clear viewing window that meets NEMA 4X/IP65 requirements, when
properly installed. Continuous exposure to direct sunlight might accelerate the
aging process of the plastic material used in the bezel. The bezel should be
cleaned only with a soft cloth and neutral soap product. Do NOT use solvents.
The display is a dual line, 6 digit LCD. On units with backlighting, the upper
Main Display is red and the lower Secondary Display is green.
There are up to seven annunciators available in the lower display that
illuminate to inform the operator of the counter and output status. See Figure 10,
Front Panel, for a description of the annunciators.
Four front panel keys are used to access different modes and parameters. The
following is a description of each key.
Do not use tools of any kind (screwdrivers, pens, pencils, etc.) to operate the
keypad of this unit.
Keypad Functions

- This key is a user programmable key. When the key is pressed, the unit
performs the appropriate function as programmed. The RST printing on
this key is used as a quick reference for the operator if the function key is
selected for a reset function.

- This key is used to access programming, enter changes to data values,
and scroll through the available parameters in any mode.

- This key selects the next available mode option during programming.
When programming a numerical value in digit entry mode, this key is used
to increment the selected digit position. In auto scrolling entry mode, it
increments the value. When in the operating mode, this key is pressed to
allow changing of the data value viewed in the secondary display.

- When programming a numerical value in digit entry mode, this key
accesses the value and selects the digit to the right. In auto scrolling entry
mode, it decrements the value. When in the operating mode, this key is
pressed to allow changing of the data value viewed in the secondary
display.
-11-
SECONDARY DISPLAY
F1
RST
being viewed or modified.
Indicate which value is
VALUE ANNUNCIATORS
P
1 3
S R
2
1 0
3 0
2 0
Displays the prescaler, preset,
output time, or batch/total
count values.
Also displays mnemonic or
numeric value when modifying
a parameter.
OUTPUT ANNUNCIATORS
Displays count value.
Also displays mnemonic of
selected parameter in
Programming Menu.
MAIN DISPLAY
Figure 10 , Front Panel
FRONT PANEL DESCRIPTION