RED LABEL RL4TPP, Руководство пользователя

Страница: 4 / 15

Product Code: RL4TPP
Page 4
Hose Safety Instructions:

Before operating the pump, tighten all hose connections using the correct tools. Do
not over tighten; connections need only be secure and leak free. Over tightening can
cause premature thread failure or high pressure fittings to split at pressures lower
than their rated capacity.

Should a hydraulic hose ever rupture, burst, or need to be disconnected,
immediately shut the pump OFF, and open the control valve to release all pressure.
Never grasp a leaking, pressurised hose with your hands; the force of escaping
hydraulic fluid could cause serious injury.

Do not subject the hose to any potential hazard such as fire, extreme cold or heat,
sharp surfaces, or heavy impact. Do not allow the hose to kink, twist, curl, or bend
so tightly that the fluid flow within the hose is blocked or reduced. Do not use the
hose to move attached equipment. Periodically inspect the hose for wear, because
any of these conditions can damage the hose and result in personal injury.

Hose material and coupler seals must be compatible with the hydraulic fluid used.
Hoses must not come in contact with corrosive materials.
Coupler Valves

KEEP COUPLER VALVES PROTECTED WHEN NOT IN USE. Dust caps are included for
all Coupler Valves and should be screwed in when not in use to keep equipment
clean. Keep couplers and valves debris, dirt and dust free