Red Hat NETWORK 4.0 -, Справочное руководство

Страница: 229 / 290

Appendix C. Probes 213
Field Value
Command*
OK Exit Status*
0
Warning Exit Status* 1
Critical Exit Status* 2
Timeout 15
Table C-10. General::Remote Program with Data settings
C.4.3. General::SNMP Check
The General::SNMP Check probe tests your SNMP server by specifying a single object
identifier (OID) in dotted notation (such as 1.3.6.1.2.1.1.1.0 ) and a threshold as-
sociated with the return value. It collects the following metric:
•
Remote Service Latency — The time it takes in seconds for the SNMP server to answer
a connection request.
Requirements — SNMP must be running on the monitored system to perform this probe.
Only integers can be used for the threshold values.
This probe’s transport protocol is User Datagram Protocol (UDP).
Field Value
SNMP OID*
SNMP Community String*
public
SNMP Port* 161
SNMP Version* 2
Timeout* 15
Critical Maximum Value
Warning Maximum Value
Warning Minimum Value
Critical Minimum Value
Table C-11. General::SNMP Check settings