Red Hat NETWORK 4.0 -, Справочное руководство

Страница: 168 / 290

152 Chapter 6. Red Hat Network Website
Note
This action deletes all of the Probe Suites’ probes from the system as well as all of the
historical Time Series and Event Log data. This action is irreversible.
To remove a system from the Probe Suite and delete all associated probes from the system:
1. From the Monitoring
⇒
Probe Suites page, click on the title of the Probe Suite you
wish to alter.
2. Select the Systems sub-tab.
3. Check the box next to the system(s) you wish to remove from the Probe Suite.
4. Click the
Remove System(s) from Probe Suite button.
6.9.4. Scout Config Push —
Displays the status of your monitoring infrastructure. Anytime you make a change to your
monitoring configuration, such as adding a probe to a system or editing a probe’s thresh-
olds, you must reconfigure your monitoring infrastructure. Do this by selecting the RHN
Server’s checkbox and clicking Push Scout Configs . The table on this page identifies the
date and time of requested and completed pushes.
Clicking the name of the server opens its Red Hat Network Monitoring Daemon SSH Pub-
lic Key. This allows you to copy and paste the SSH key to the systems that are monitored
by the scout. This is required in order for the Red Hat Network Monitoring Daemon to
connect to the Satellite.
6.9.5. General Config —
Collects information that is universally applicable to your Monitoring
infrastructure.Modifying anything on this page causes the Monitoring services on the
RHN Satellite Server to reset. It also schedules restart events for the Monitoring services
on all Monitoring-enabled RHN Proxy Servers that connect to this Satellite. This is done
so that the Monitoring services on these servers immediately reload their configuration.
Typically, the defaults provided in other fields are acceptable, since they are derived from
your Satellite installation. Nevertheless, you may use the fields on this page to alter your
Monitoring configuration. For instance, you may change your mail exchange server here.
This page also allows you to alter the destination of all administrative emails from the
Satellite. When finished, click Update Config .