Red Hat ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES Скачать руководство пользователя страница 71

Страница: 71 / 108

Appendix E. Additional Boot Options

This appendix discusses additional boot and kernel boot options available for the Red Hat

Enterprise Linux installation program.

Add these boot options to the parameter file. For more information, refer to

Section 5, “Installing

under z/VM”

Boot Time Command Arguments

askmethod

This command asks you to select the installation method you would like to use when

booting from the Red Hat Enterprise Linux CD-ROM.

dd=url

This argument causes the installation program to prompt you to use a driver image from a

specified HTTP, FTP, or NFS network address.

display=IP:0

This command allows remote display forwarding. In this command,

should be replaced

with the IP address of the system on which you want the display to appear.

On the system you want the display to appear on, you must execute the command

xhost

+remotehostname

, where

remotehostname

is the name of the host from which you are

running the original display. Using the command

xhost +remotehostname

limits access to

the remote display terminal and does not allow access from anyone or any system not

specifically authorized for remote access.

mediacheck

This command gives you the option of testing the integrity of the install source (if an

ISO-based method). This command works with the CD, DVD, hard drive ISO, and NFS ISO

installation methods. Verifying that the ISO images are intact before you attempt an

installation helps to avoid problems that are often encountered during an installation.

noprobe

This command disables hardware detection and instead prompts the user for hardware

information.

rescue

This command runs rescue mode. Refer to the Red Hat Enterprise Linux System

Administration Guide for more information about rescue mode.

text

This command disables the graphical installation program and forces the installation

program to run in text mode.

vnc

Содержание ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES













































































































Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES, Руководство по установке

Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES

Бренды по названию

Популярные бренды