Red Hat ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER ZSERIES, Руководство по установке

Страница: 15 / 108

Note
DASD installations only work from ext2 or ext3 file systems. If you have a file
system other than ext2 or ext3 you will not be able to perform a DASD
installation.
To prepare your system for a hard drive installation, you must set the system up in one of the
following ways:
• Using a set of CD-ROMs — Create CD-ROM ISO image files from each installation CD-ROM.
For each CD-ROM, execute the following command on a Linux system:
dd if=/dev/cdrom of=/tmp/file-name.iso
This command may raise an error message when the data at the end of the CD-ROM is
reached which can be ignored. The ISO images created can now be used for installation,
once copied to the correct DASD.
• Using ISO images — transfer these images to the system to be installed (or to the correct
DASD).
Verifying that ISO images are intact before you attempt an installation, helps to avoid
problems. To verify the ISO images are intact prior to performing an installation, use an
md5sum
program (many
md5sum
programs are available for various operating systems). An
md5sum
program should be available on the same Linux machine as the ISO images.
Make the correct DASDs accessible to the new VM or LPAR, and then proceed with
installation.
Additionally, if a file called
RedHat/base/updates.img
exists in the directory from which you
install, it is used for installation program updates. Refer to the file
install-methods.txt
in the
anaconda
RPM package for detailed information on the various ways to install Red Hat
Enterprise Linux, as well as how to apply the installation program updates.
5. Installing under z/VM
Log onto z/VM as the Linux guest account. You can use x3270 or c3270 (from the x3270-text
package in Red Hat Enterprise Linux) to log in to z/VM from other Linux systems. Alternatively,
use the OS/2 3270 terminal emulator on the S/390 management console. If you are working
from a Windows based machine, Jolly Giant ( http://www.jollygiant.com/
[http://www.jollygiant.com]) offers an SSL-enabled 3270 emulator.
If you are not in CMS mode, enter it now.
Installing under z/VM
5