Red Hat DIRECTORY SERVER 7.1 Скачать руководство пользователя страница 548

Страница: 548 / 652

About Windows Sync

548

Red Hat Directory Server Administrator’s Guide • May 2005

Windows Sync provides some control over which entries are synchronized. This

is intended to allow administrators to determine that only a subset of all the

entries should be subject to synchronization and to give sufficient flexibility to

support different deployment scenarios. Therefore, certain rules are applied to

determine first if a particular entry should be synchronized and second if a given

new entry should be created in the peer server.

Specifically, only entries with user or group object classes are synchronized from

Windows to Directory Server. In addition, two flags with agreement scope allow

the creation of new entries for newly found entries in the Windows server to be

enabled or disabled. One flag controls new entry creation for users while the other

controls new entry creation for groups. Similarly, only entries with the necessary

object classes and attribute values in the Directory Server will be synchronized.

The Directory Server peer maintains a

replication

changelog,

a database that records

the modifications that have occurred. The changelog is used by Windows Sync to

generate outbound changes made to the Windows server. Therefore, a changelog

and the associated replica object must be configured in a Directory Server before it

may run Windows Sync.

During normal operation, all the updates made to entries in the Directory Server

that need to be sent to the Windows server are generated via the changelog.

However, when the server is initially configured or after major changes to its

content, it is necessary to initiate a

resynchronization process

. For resynchronization,

the entire contents of synchronized subtree in the Directory Server is examined

and, if necessary, sent to the Windows server. This is done without using the

changelog.

Inbound changes, that is changes to entries in the Windows server, are found by

using Active Directory’s

Dirsync

search feature. Because there is no changelog to

use, it is necessary to issue the Dirsync search periodically. The default interval is

five minutes. The Dirsync search ensures that only those entries that have

changed since the previous search are retrieved.

In the case of a server or where there have been major changes to its content, a

Dirsync search that returns all entries (and not just recently changed entries) can

be performed. This full synchronization is done whenever the administrator

initiates resynchronization, as mentioned before. In some situations, waiting for

the next scheduled Dirsync may cause data integrity problem. During this time,

recent changes made on the Windows server will not be brought over to the

Directory Server. In this case, the administrator can manually initiate an

immediate Dirsync search (described in “Manually Initiating Synchronization,”

on page 565).

Содержание DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Red Hat DIRECTORY SERVER 7.1, Руководство администратора, Страница: 548 / 652

Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы: