Red Hat DIRECTORY SERVER 7.1 Скачать руководство пользователя страница 329

Страница: 329 / 652

Configuring Multi-Master Replication

Chapter 8

Managing Replication

329

On Server A, set up the following replication agreements:

❍

One with supplier Server B, where Server B is configured as a

consumer

for

the replica.

❍

One for each consumer servers, Server C and Server D.

To do this:

In the Directory Server Console, select the Configuration tab.

In the navigation tree, right-click the database to replicate, and select New

Replication Agreement.

Or highlight the database, and select New Replication Agreement from the

Object menu. This will start the Replication Agreement Wizard.

Go through the steps in the replication wizard by clicking Next to move to

the following step.

You can initialize the read-only replicas and the read-write replica on

Server B from the Replication Agreement Wizard or at anytime afterwards.

For information on the order and procedure for initializing read-only

replicas, refer to “Initializing the Replicas for Multi-Master Replication,”

on page 330, and “Initializing Consumers,” on page 345.

When you have finished, the replication agreement is set up.

On Server B, set up the following replication agreements:

❍

One with supplier Server A, where Server A is declared as a

consumer

for

the replica. During this operation, do not initialize Server A from Server B

if you have already initialized Server B from Server A in Step 4.

❍

One for each consumer servers, Server C and Server D.

When you have configured the servers holding the read-write replicas, the

necessary replication agreements, and the servers holding the read-only replicas,

you are ready to initialize replication. You can perform this task when you create

the replication agreements on the supplier servers or at any time afterwards.

NOTE

Once you have completed these procedures, Server A and Server B

have mutual replication agreements, which means that they can

accept updates from each other.

Содержание DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Red Hat DIRECTORY SERVER 7.1, Руководство администратора, Страница: 329 / 652

Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы: