Red Hat DIRECTORY SERVER 7.1 Скачать руководство пользователя страница 349

Страница: 349 / 652

Initializing Consumers

Chapter 8

Managing Replication

349

Initializing the Consumer Replica from the Backup Files

Create a new database on the destination server to match the database from the

source server.

Before you begin initializing the consumer from the backup files, be certain

that you have created the appropriate database on your destination server so

that the database exists to be “restored” and initialized.

Enable replication on the backend as a dedicated consumer.

Create the replication agreement on your source server (or whatever server

you will use as the supplier), and select the “Do not initialize consumers at this

time” radio button.

If you already have a replication agreement to that host and port, you do not

need to create a new replication agreement since replication should resume

immediately after running the restore script.

At the command prompt, change to the following directory on the source

Directory Server:

serverRoot

/slapd-

serverID

Stop the source Directory Server if it is running by typing the following:

./stop-slapd

From the command-line, run the

db2bak

utility, and archive your current

directory installation. You can also create a new backup by hitting the "Back

Up Directory Server" button in the Tasks tab of the Directory Server Console,

and then putting the name of your archive directory in the “Directory:...” field.

You can also select any previous back-up to initialize the consumer if you

prefer.

This information is recovered in the destination replica.

Restart the source Directory Server by typing the following:

./start-slapd

Copy the archived files to a directory on your destination server, such as

archiveDirectory

At the command prompt, change to the following directory on the destination

Directory Server:

serverRoot

/slapd-

serverID

Содержание DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Red Hat DIRECTORY SERVER 7.1, Руководство администратора, Страница: 349 / 652

Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы: