Recsea WHS-RX100Mk 3, Руководство пользователя

Страница: 6 / 12

4. Using fresh water and a soft toothbrush, gently clean Control Ring Dial, Dial Locking Ring,
Dial Locking Ring Grooves at base of Lens Port and Control Ring Gear as needed.
NOTE: The Control Ring Gear can be easily turned to the left or right using a fingernail. Do
not use screw driver or other metal object as they may damage the gear.
5. Using a soft cloth dry Control Ring Dial, Dial Locking Ring, Dial Locking Ring Grooves at
base of Lens Port and Control Ring Gear.
6. Turn Control Ring Gear until one of three of the Control Ring Gear Lubrication Ports is
visible as shown in the above image. Using a “PLASTIC SAFE” silicone spray, lightly
spray silicone in the port to lubricate the gear.
CAUTION! DO NOT use silicone spray brands such as CRC or 3-in-1 silicon spray products
which will damage to the Control Ring Dial assembly.
7. Using Seatool O-ring Grease, lightly grease the entire circumferences of the Control Ring
Lubrication Surface.
NOTE: The Control Ring Dial sits directly on Control Ring Lubrication Surface which needs to
be lubricated for smooth performance.
8. Place Control Ring Dial and then Dial Locking Ring onto Lens Port. Gently turn Locking
Ring to the right (clockwise) until drops and locks into place. Attach Port Protection Ring.
OPENING AND CLOSING THE BACK COVER
※
Please do the following operations in a clean area with low humidity and dust.
4