Recsea WHS-RX100Mk 3, Руководство пользователя

Страница: 5 / 12

ATTENTION!
※
The housing Mode Dial and rear Control Dial are designed to turn the camera dials back
and forth via friction from the O-rings that come in contact with camera functions inside the
housing. When installing or removing camera pull Mode Dial up. After installing be sure to
place the Mode Dial contact into the proper position. Should the O-ring of the internal
control wheels of the housing begin to slip, use a soft dry cloth to wipe away any oil and
other contaminates that may cause the loss of friction from both the camera functions and
O-ring.
※
Please refer to camera manual for explanation of Control Dial and Control Ring Dial.
※
Use Strobe Mask-External Strobe Connection Mount as required for attaching fiber optic
flash cables. Be sure to attach Diffuser and shown above.
※
Attached Diffuser using the grooved provided on the Lens Port.
HOW TO DISASSEMBLE, CLEAN AND LUBRICATE CONTROL RING DIAL
※
The Control Ring Dial can be removed to lubricate the internal moving parts and to clean
away sand, mud or other contaminants when dial does not turn smoothly.
1. Remove Port Protection Ring by unscrewing it from the Lens Port.
2. Using the Dial Locking Ring Tabs turn Dial Locking Ring to the left (counterclockwise) until
it stops.)
3. Holding the Control Ring Dial, gently lift Dial and Locking Ring off Lens Port as shown
below.
3