Record K 32 M, Руководство пользователя

Страница: 19 / 24

Servicing and maintenance
6
BAL_K32_K42_M_EN_1V1_REC_121-006454677 19 / 24
CAUTION
Danger of people being trapped inside the turnstile.
a) Bruises and contusions through from the turnstile wing.
ð Visual inspection, check whether people are trapped inside.
Visual inspection of the instructions
and labeling (buttons / switches) – Verify that all labels are present
and legible.
– All labels must be present, legible
and firmly applied.
Visual inspection of the floor covering – Verify the floor covering for pos-
sible tripping hazards, uneven-
ness, damages, and dirt accumu-
lation.
– The floor covering must be free
from tripping hazards, uneven-
ness, damages and dirt accumu-
lation.
CAUTION
Risk of burns, hot surfaces!
a) Risk of burning hands when replacing bulbs!
ð Allow bulb to cool at least 5 minutes before replacing and/ or wear protective gloves.
Visual inspection lighting – Verify whether the lights are in-
stalled correctly and turn them
on.
– Lights must be installed correct
and function.
Function test Night shield – Close and lock the night shield.
– Push to verify whether the night
shield is locked securely.
– The night shield is completely
closed and locked.
Operator casing – Check the attachment of the op-
erator casing.
– It must be completely closed and
must correctly engage into the
hinges.
Function test of the speed control
brake
– Rotate the turnstile faster than
normal speed until automatic
braking of the rotation occurs.
– The turnstile will be harder to
push.
– After reducing the rotation
speed, the turnstile should be
easier to push.
Function test of the turnstile lock ,
for example bar bolt lock or corner
lock .
– Rotate the turnstile to the lock po-
sition.
– Engage the lock.
– Push to verify whether the turn-
stile is securely locked.
– The turnstile is securely locked.
Visual inspection of the glass label – Verify that the label is present. – The glass label must be firmly at-
tached at eye level.
6.3 Cleaning and care
DANGER
Warning: risk of fatal electric shock!
a) Risk of death by electric shock
ð
Do not touch the drive system while the main power is connected.
ð Do not spray water into the drive system.