Record Power BS300E Premium, Оригинальное руководство пользователя

Страница: 12 / 41

12
3. Stand & Wheel Kit Assembly
- cont.
3.4 Fitting the bandsaw to the stand
CAUTION! The machine is heavy.
Additional help or a suitable lifting
device or support will be required for
lifting the machine onto the stand.
1. Lift the bandsaw over the stand and place the
long fixing bolts through the four location holes
in the bandsaw base
Fig.3.11 .
2. Secure the bandsaw to the stand with the
remaining washers and nuts
Fig.3.11 .
Fig.3.10
LONG FIXING BOLTS
1. Feed the long fixing bolts up through the
stand and secure the four corners using the
washers and bolts provided
Fig.3.10 . The whole
stand can now be fully tightened ready for the
bandsaw to be fitted.
i
Kg
i
Kg
Fig.3.11
200mm 17º
WARNING! For your safety only use the
handle to pull the machine. It is unsafe
to push the machine using the handle.
When lifting the stand ensure the front
legs are not raised higher than 200 mm
from the ground (or at an angle of more
than 17º). Fig.3.12.
Fig.3.12
i
Kg
LOCATION
HOLES