Record Power BS300E Premium, Оригинальное руководство пользователя

Страница: 10 / 41

10
3. Stand & Wheel Kit Assembly
- cont.
Note: When assembling this legstand do
not fully tighten the nuts and bolts until
the assembly is complete.
When fitting the optional pedal wheel
kit during initial assembly of the
bandsaw, please do so before attaching
the bandsaw to the leg stand to ensure
greater safety and ease of fitment.
When fitting the optional pedal wheelkit,
the short mid brace support (Fig. 3.7) at
the front of the bandsaw should
be removed.
Please see section 15 for assembly
instructions of the BS300A Pedal
Wheel Kit.
3.2 Stand Assembly
1. Locate the first leg and secure it to one of the
long top brace supports using the nuts, bolts
and washers supplied
Fig.3.2 .
2. In the same way, attach the second leg to the
brace support
Fig.3.3 .
3. Locate the short top brace supports and fix to
the legs as shown
Fig.3.4
.
4. Continue in this way until all of the legs and
top brace supports have been fitted
Fig.3.5 .
5. The locating holes a third of the way down
each leg are for securing the mid brace supports.
Fix the long mid brace supports to the frame
using the nuts, bolts and washers
Fig.3.6 .
6. Finally, fit the short and medium mid brace
supports to the shorter sides
Fig.3.7
. Short
mid brace support is fitted to holes positioned
two thirds of the way up each leg. Medium mid
brace support is positioned in the lower holes in
each leg.
Fig.3.3
Fig.3.4
Fig.3.5
Fig.3.6 Fig.3.2
Fig.3.7
SHORT MID
BRACE SUPPORT
LONG TOP BRACE
SUPPORT
SHORT TOP BRACE
SUPPORTS
LONG MID BRACE
SUPPORTS
i
Kg
MEDIUM MID
BRACE SUPPORT