reci FC1000 Скачать руководство пользователя страница 4

Страница: 4 / 45

Beijing Reci Laser Technology Co., Ltd

User Guide for Single Module Fiber Laser

Chapter 1 Safety Information

Thank you for choosing the single module fiber laser from Reci laser.

In order to guarantee the fiber laser is operated safely (including personnel

safety, equipment safety, production safety), ensure the product remain its best

condition for a long time. We compile this document with important safety, operating,

maintaining and other information. Please take time to read and understand this

User's Guide and familiarize yourself with the operating and maintenance instructions

before using the product.

1.1 Safety Conventions used in the User Guide

SYMBOLS

DESCRIPTION

WARNING :

Refers to a potential hazard that may leads to a personal injury

or death.

CAUTION :

Refers to a potential hazard on product, or a potential physical

injury on personnel.

SYMBOL

IMPORTANT :

Refers to any information regarding the operation of the

product. Please do not overlook this information.

1.2 Laser Classification

This series of lasers emit invisible laser radiation around a wavelength of 1080 ±

3nm. The average power of the products is ranged from 10% to 100% at a maximum

Содержание FC1000














































Результаты поиска

Содержание FC1000

Отзывы:

Похожие инструкции для FC1000

Бренды по названию

Популярные бренды

reci FC1000, Руководство пользователя

Результаты поиска

Содержание FC1000

Отзывы:

Похожие инструкции для FC1000

Бренды по названию

Популярные бренды