ReChargX
™
RX292
8am - 8pm ET Mon - Fri
© 1995-2014 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V1.01 - 2014.06.24
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 6 of 12
Step 12: Seal the toner hopper hole with the
toner port plug
Retrieve the toner port plug from the ReChargX™
RX292 premium print toner refill kit. Using small
needle-nose pliers, twist the toner port plug clockwise
into the toner hopper hole until it sits flush with the
toner cartridge (figure 12-1).
About waste toner
The waste toner is an accumulation of toner that is
discarded during the printing process.
This waste toner has become a mixture of toner,
paper particles, and other foreign objects. The
waste toner is not suitable for re-use.
The following steps will detail the process of
removing the waste toner from your cartridge.
Step 13: Position the toner cartridge for creating
the waste hopper hole
To position the cartridge correctly for creating the
waste hopper hole, rotate the cartridge 180 degrees
from its current position so that the handle (A) is now
facing away from you (figure 13-1).
Step 14: Identify the location for the cartridge
waste hopper hole
The toner cartridge waste hopper will be located on
the bottom-left edge of the toner cartridge as
indicated by the white circle (figure 14-1).
Figure 12-1:
Sealing the toner hopper hole with the port plug
A
Figure 13-1:
Positioning the toner cartridge for creating the
waste hopper hole
Figure 14-1:
Identifying the location of the waste hopper hole
