ReChargX
™
RX292
8am - 8pm ET Mon - Fri
© 1995-2014 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V1.01 - 2014.06.24
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 5 of 12
For the easiest, quickest and most mess-free refilling,
tilt the end of the cartridge up with the toner hopper
hole at a 45 degree angle and slowly angle the
dispenser spout on the bottle of toner to meet up
with the hole (figure 9-1). Tilting the bottle up a little
more will start the toner flowing into the toner hopper.
Pour the toner slowly.
RESIST ALL TEMPTATION
TO SQUEEZE THE BOTTLE
to increase the flow
of toner. The likelihood of toner escaping under
pressure greatly increases when the bottle is
squeezed while filling the cartridge. If the toner
stops flowing, return the bottle to the upright
position and restart the filling process.
Fill the cartridge until the hopper appears to be full.
Any toner remaining in the bottle can be used at a
later date after you have completed a significant
amount of printing.
Step 10: Activate the toner grabber cloth
Take the orange toner grabber cloth from the
ReChargX™ RX292 premium print toner refill kit and
stretch it along both dimensions; the cloth will stretch
considerably in one dimension and not the other
(figure 10-1). Stretching the toner grabber cloth
activates the toner retaining substance embedded
within the cloth which gives it the ability to pick up
and retain toner.
Note
: Only use the toner grabber cloth on the exterior
of the cartridge. Do not use the cloth to clean any of
the internal components or the drum as the toner
grabber will leave a residue on those critical image
production components which will affect the quality of
the print output.
Step 11: Clean the area around the toner hopper
Before sealing the toner hopper hole with the plug,
the area around the toner hopper opening must be
cleaned. Using the toner grabber cloth, firmly wipe
around the area of the toner hopper hole (figure
11-1). You may also want to use the cloth to clean
any toner left on the toner bottle dispenser spout and
your immediate work space.
Figure 9-1:
Adding toner to the toner hopper
Figure 10-1:
Stretching the toner grabber cloth
Figure 11-1:
Cleaning the area around the toner hopper opening
