background image

REC TwinPeak Series Installation Manual - UL 1703
Rev B - 03.15 

Ref: NE-06-08-B

3

iNTRoDUCTioN

Thank you for choosing REC photovoltaic panels.  REC TwinPeak solar panels are ideal for delivering long-lasting and reliable power output.  The panels 

have been created through intelligent design and are manufactured to the highest quality and environmental standards.  with correct installation and 

maintenance, REC TwinPeak panels will provide clean, renewable energy for many years.
Please read this entire manual carefully.  it contains critical information on safety, as well as detailed instructions for installation, operation and 

maintenance of this panel.  Failure to follow the procedures contained within will invalidate the warranty.  Review all instructions and safety notes 

before working on the system.  Failure to do so may lead to injury or damage to property.

How to usE tHIs manual

This installation manual describes the procedures for mounting all REC TwinPeak solar panels in a photovoltaic array (certified according to the UL 

1703 standard), including REC TwinPeak panels with a black backsheet and/or a black frame, from hereon all referred to as REC TwinPeak panels.  The 

drawings within refer to all frame, backsheet and cell color types and are meant to be a generic representation of the instructions detailed in the text 

regardless of the color depicted.  The installed panel is only considered to be in compliance with UL 1703, only when mounted in the manner specified 

by these mounting instructions below.  Note that any panel without a frame (laminate) is not considered to comply with the requirements of UL 1703 

unless mechanically installed with hardware that has been tested and evaluated with the panel under this standard or by a field inspection certifying 

that the installed panel complies with the requirements of UL 1703.
Review the entire manual before installing the panels and ensure you are working from the latest version.  Throughout the manual, you will see the 

icons below which highlight important information or notes:

Indicates potential for damage to the array or property or personal safety.

Indicates important notes on best practice to help with the installation or to avoid potential damage to the panels, array or property.

For further information on installation procedures, please call your distributor or contact your local REC Solar office.  Details available at www.

recgroup.com. 

youR REsponsIbIlIty as an InstallER

installers are responsible for the safe and effective installation and operation of the photovoltaic system and for adhering to all local and national 

standards and regulations.  Prior to installation, check all applicable regulations and permits concerning solar systems and ensure all local directives 

are observed.

• 

Ensure the REC TwinPeak panels are in a suitable condition for use and appropriate for the particular installation and environment

• 

Use only parts that convene to the specifications set out in this manual

• 

Ensure a safe installation of all aspects of the electrical array

All equipment should be properly maintained and inspected prior to use.

suppoRt

Do not attempt to install when you are unsure of the procedure or suitability.  For questions or guidance with your installation, please call your 

distributor or contact your REC sales office, which can be found at: www.recgroup.com/en/contacts.

lIabIlIty DIsClaImER

REC SoLaR PTE. LTD. accepts no liability for the usability and functionality of its photovoltaic panels if the instructions in this guide are not followed.  

Since compliance with this guide and the conditions and methods of installation, operation, use and maintenance of the panels are not checked or 

monitored by REC SoLaR PTE. LTD., REC SoLaR PTE. LTD. accepts no liability for damage arising from improper application or incorrect installation, 

use, operation or maintenance.  This does not apply to damages due to a panel fault, in cases of loss of life, bodily injury or damage to health or in the 

event of a grossly negligent breach of obligations on the part of REC SoLaR PTE. LTD. and/or in the event of an intentional or grossly negligent breach 

of obligations by a legal representative or vicarious agent.

Содержание REC265 Series













Отзывы: