Rebotec 363.00.30, Руководство пользователя

Страница: 7 / 12

REBOTEC /
BA-Nr.: 02.08.203/2021-01-A01
- 7 -
EN
9.3. Assembling the backrest
•
Hold the backrest in position 1.
•
Have the clamping elements engage completely.
•
Insert the clips (1) at the underside for fastening.

Attention! Never use the product without the
clips in place.
•
The product is now ready for use.
9.4. Adjusting the seat height
•
Remove the adjustment clips by lightly pressing
against the flanks.
•
Pull out the inner tube to the desired position.

The hole spacing between the individual posi-
tions is 25mm.

Attention! Never use the product without the ad-
justment clips in place.

All tube sets must be set to the same height.
•
Now mount the clips.

Make sure that the inner tube is not pulled out
too far. The adjustment clip must always engage
in one of the holes of the inner tube.
10. Product data
•
We reserve the right to make technical develop-
ments and improvements with respect to the de-
sign shown in this User Manual.
•
See 14.
Characteristic Value
1. User weight max. 130 kg
2. Product weight* 4.6 kg
3. Total weight* 5.1 kg
Skin compatibility DIN EN 10993-1/-5
*Without accessories.
11. Operation of the product
Attention: Danger of falling!
•
Observe the safety instruction (4).
•
Before use, it must be ensured that the product is
in proper condition.
•
A stable position with no risk of slipping or tipping
over must be ensured.
11.1. Sitting down
•
The user must position themselves as close as
possible to the product. If necessary, they can ori-
entate or support themselves with their hands on
the armrests.
•
If this is not possible due to their physical limita-
tions, the user must seek the assistance of a com-
petent person. This can be done with the help of
an assistive device.
11.2. Getting up
•
To get up, the feet must be in contact with the floor.
•
Then, slightly shift your weight forward and slowly
rise from the seat.
•
Do not lean your body too far forward to avoid the
risk of falling. If necessary, the user must seek help
to get up from the stool.
12. Care and maintenance
12.1. Cleaning and care
The product can be cleaned using a mild
conventional cleaning and disinfecting
agent. After cleaning, wipe the product with a clean,
moist cloth and then wipe it dry with a dry cloth.
•
Do not use scouring agents or cleaning agents
with aggressive ingredients (acids, thinners), as
well as hard cleaning objects (brushes), as other-
wise the surfaces may be damaged or deposits
may form on the materials.
•
The product is suitable for machine cleaning and
disinfection. Please observe the reprocessing in-
structions (02.12.159).
2
1
1