Rebotec 363.00.30, Руководство пользователя

Страница: 3 / 12

REBOTEC /
BA-Nr.: 02.08.203/2021-01-A01
- 3 -
EN
1. Product description
Figure shows:
A Seat plate
B Backrest
C Armrests
D Clips
E Tube set
F Tube holder with union nut
G Adjustment clip
H Foot cap
I Guide bush
J End plug
K Nameplate
1.1. Introduction
•
The product described here is a medical device of
risk class I according to (EU) 2017/745 MDR .
•
In this user manual, you will find information on the
safe and proper initial operation, use, maintenance
and care of this product.
•
Carefully read this user manual before using the
device. Follow the safety instructions and act ac-
cordingly.
2. Features
2.1. Intended purpose
•
The product is intended for the care of patients
with limited ability to stand. It allows you to shower
while sitting down. The patient must have sufficient
sitting ability and upper body musculature. If nec-
essary, a nurse must be present during use. The
product is not intended for prolonged sitting.
Specification:
•
Maximum user weight: 130kg
•
Stable chair
•
Indoor use
Indication
•
If it is impossible for patients to safely stand in the
shower, due to damage to the function of the lower
extremities with limited or eliminated mobility and
muscle strength and/or damage to the vestibular
functions or tendency to fall due to other causes,
while at the same time maintaining a sufficiently
stable thorax posture for sitting and sufficient re-
sidual functions of the upper extremities.
•
Objective: Enabling independent or more inde-
pendent showering.
Example diagnoses:
•
The spectrum of possible diagnoses is extensive.
It ranges from general old age weakness to arthro-
sis of the lower extremities.
2.2. Conditions of use
•
Temperature range: 10°C to +40°C; direct radiant
heat on the product must be avoided.
•
Relative humidity: 20%-60%. Outside of these
conditions, the product must only be used for a
short time.
•
The product is not suitable for use in swimming
pools or saunas, as surface discolouration and lim-
itations of mechanical strength may occur.
•
Disassembly for transport or storage is possible.
•
There must be a flat surface of sufficient size for
the stool to be placed on. See 14.
2.3. Storage & transport
•
Temperature range: 0° C to +40° C; direct radiant
heat on the product must be avoided.
•
Store the product in dry rooms with a humidity of
20-55%.
A
B
C
D
F
E
G
H
I
C
J
K