Rebel TOOLS MIE-RB-202, Руководство пользователя

Страница: 10 / 28

PRODUCT DESCRIPTION
1. Clamp
2. Clamp release button
3. Rotary switch
4. Measurement hold button
5. MAX button
6. SELECT button
7. Display
8. Connection terminals
OPERATION
• Press the data hold button to hold the measurement value.
Press the data hold button again to go back to current
reading.
• Press the MAX button to display the highest recorded
measurement.
• Press the SELECT button to change the function.
AC current measurement
1. Set the rotary switch to 200/400 A position. If the display
shows one to more than one leading zeros, set the range
to 2/20 A.
2. Put the measured wire between clamps, perpendicular to
the meter and in the central part between clamps, and
make sure that the clamps are closed. If more than on wire
is placed between clamps, reading may be inaccurate.
3. The result will be displayed on the display.
AC and DC measurement
1. Connect the red test wire to the VΩ terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to proper voltage range.
4. Connect the test leads to the measured circuit.
5. Turn on the power on measured circuit. The result will
appear on the display.
200 / 400A
2 / 20
SELECT MAX HOLD
A
OFF
V
V
~
CLAMP MULTIMETER
CAT III 300V
CAT II 600V
V
COM
~
~
1
2
6
7 5
3
4
8
EN
10