Rears PULBLAST A/R PUMP, Руководство пользователя

Страница: 22 / 76

Pul-Blast
AR pump system
4
TRACTOR PTO
TRACTOR DRAWBAR
19
11
16
1
2
+
–
8 2
+–
Hook-up instructions
Modular Tongue
1. Read and understand all instructions before beginning.
2. Adjust tractor drawbar fig.1 . For drivetrain longev-
ity, it is important that these alignments be within
specified tolerances.
3. Connect implement hitch pin to tractor. DO NOT install
driveline.
4. As illustrated in fig ii , position tractor and implement
at maximum angle.
5.
Install the driveline onto the tractor PTO shaft and
implement drive shaft: spline lock must snap into shaft
groove. Be certain u-joints align exactly as illustrated
in
fig ii .
If connection cannot be made, contact your
dealer
for
tractor drawbar modification.
Never engage PTO when tractor and implement are
at an angle.
For long drivetrain life, the tractor and
implement should be in-line when engaging or disen-
gaging the PTO drive.
fig i
fig ii
U-Joints must be aligned as
shown (in phase) or damage
will occur.
NEVER engage PTO
when tractor and implement
are at an angle.
CHEMICAL CONTAINERS INC.
800 346 7867