Rears PULBLAST A/R PUMP, Руководство пользователя

Страница: 32 / 76

Pul-Blast
AR pump system
14
cross to cross
whole driveline halves
a
yoke & shaft assembly
b
end yokes
c
driveline shields
d
z
male half
female half
x
y
y
x
y
z
18”
18 1 /
2
”
19”
19
1
/
2
”
20”
20 1 /
2
- 23”
23 1 /
2
”
24 - 28”
28
1
/
2
- 32
1
/
2
”
2 1 /
2
”
2”
1 1 /
2
”
1”
1 /
2
”
0”
1 /
2
”
0”
0”
15”
15 1 /
2
”
16”
16
1
/
2
”
17”
17 1 /
2
”
20 1 /
4
”
20 3 /
4
”
24
3
/
4
”
chart a
supplied yokes may not be as illustrated
A telescoping implement driveline is shipped with your
sprayer to mount between your tractor and implement.
Rears has a wide selection of implement drivelines to
accomodate your tractor. To determine the right tele-
scoping driveline for your tractor, you need to have the
following information:
your tractor PTO shaft size and spline
the distance between the end of your tractor’s PTO
output shaft and the center of the lifting balls
x
as il-
lustrated, above right. This distance must be measured
when the lift balls and shaft are in-line.
Using chart b , page over: find the available drivelines for
your lift balls distance,
x
, and select the female driveline
spline that matches your tractor’s output shaft.
The provided telescoping driveline will match most trac-
tors within the range for
x
indicated in chart b . Some
tractors may require driveline length modification: see
chart a .
For your
x
value in chart a , find what
y
modification is
required. If modification is needed, shorten the driveline
shield and the male shaft of the driveline by the
y
listed
amount. As illustrated, the shield and the shaft must
be measured and cut independently. The final modified
cross-to-cross distance of your driveline,
z
(measured
when collapsed) is given for reference. Do not cut more
than 2-1/2” off the driveline half.
PTO driveline for CV Hitch system
CHEMICAL CONTAINERS INC.
800 346 7867