Parking Sensor System
Fig.24
-
Connection between each unit of
TFTSeries
•
Connection of sensors
rn the order of serial number shown in Fig.
3,
insert plugs of
sensor cable to the sockets of
ECU.
Make sure that each pair of
the connected plug and socket are marked with the same serlal
number; otherwise the display may show wrong direction.
OJ 17
For systems with only
2
sensors, connect sensors with the
sockets No.
2
and
3
of
ECU.
:>
Powering up
For details,
refer to 'Powering up• on PElf/6 20.
:i
Installation
of
each unit
For details,
refer to 'where ta insta/J•
on page
14
:>
Test
For details,
refer to 'Alter-Jnst.allatJon Tests• on
page 2 l.
,. Tips on Sensor lnstallatlon
:i
Types
of
sensor
There are
2
types
of
sensor:
adhesive and recess ones, see
Fig.
25.
•
Adhesive type:
Flg.25
To be stuck on the bumper surface. Usually, our system can be
equipped with
2
sensors of such type, which is specially designed
for easy and fast
DIY
Installation.
•
Recess type: To be installed inside the bumper. This tight and
stable mounting ensures sensors to be highly interference
reslsta nt, and sensors can work perfectly under bad weather
conditions.
