Parking Sensor System
• TROUBLE SHOOTING
The following chart only provides you with solutions to a few simple problems
PROIJLl!M
RL\90N
SOLUTION
System doesn't react when
1.
System Is not powered up, or wrong connection
of
1.
Check If the power cable of ECU Is well connected
to
that
reverse is engaged
power cable
of
reverse fight.
2.
Invalid connection between display and ECU
2.
Check the connection between display and
EClJ
After activated, system
1.
Invalld connection between sensors and ECU
1.
Check the connection between sensors and ECU
continuously beeps fOr
3
seconds
2.
All sensors are defective
2.
Replace the defective sensors
111e display distance remains the
1.
Wrong lntalllng direction of sensors
1.
Follow the 'UP" mark and re-install sensors
same while distance
to
obstacle
2.
Adjust the position of detecting angle
to
avoid downward
var1es
2.
Wrong Installing angle of sensors
detection
In case no obstade Is found In the
1.
Some sensor Is not tightly
fixed.
detection range, display always
1.
Check if the sensor is well fixed in bumper
shows
•.p.•
ar
•sroP"',
and
2.
System is detecting vehicle itself or its spare parts,
2.
Adjust the position
of
sensors and the deb!ction angle
system beeps
for example the spare tyre
Wrong Indication of direction
111e serfal number of the sensor plug Is different from
Re-connect sensor plugs
to
ECU sockets by following the
that
of
the
EClJ
socket when they were connected
serial numbers
The display ...ruses
to
work when
Wrong connection
of
ECU's ground power cable
Connect correctly the ground power cable of ECU
vehicle's other lights are on
JJJ23
