RealWear HMT-1 T1100G, Руководство пользователя, Страница: 10 / 94

10
Safety Guidelines
Battery Performance
A rechargeable battery powers your device. Always use only the original type of RealWear battery
that came with the device. Use the battery only for its intended purpose. Never use any charger
or battery that is damaged. If the battery is completely discharged, it may take a few minutes
before the charging indicator appears on the display or before the device can be used. The
full performance of a new battery is achieved only after 3 to 4 complete charge and discharge
cycles. The battery can be charged and discharged for multiple cycles but it will eventually wear
out. Unplug the charger from the electrical plug and the device when not in use. Ensure that you
do not leave the fully charged battery connected to the charger. If left unused, a fully charged
battery will lose its charge over time.
There is a risk of explosion while charging if an incorrect battery other than the
specified model is used.
Battery Replacement
If the HMT-1 battery is not charging properly, replace the battery with an original RealWear
battery. If a replacement battery is being used for the first time or if the battery has not been
used for a prolonged period, it may be necessary to connect the charger and then disconnect and
reconnect it to begin charging the battery.
Avoid Short Circuit
Do not short-circuit the battery. An accidental short-circuit can occur when a metallic object
such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals
of the battery. This might happen, for example, when you carry a spare battery in your pocket or
toolbox. A short-circuit at the terminals may damage the battery or the connecting object.