1.
Secure side strips (Item 1) to side brackets on fire
box using screws (2 off per side strip).
Remove 2 top screws in fire box and place top
strip (Item 2) into position and secure using 2
screws.
Place base panel (Item 3) under fire box.
2.
Place LH side panel (Item 4) in behind lip of base
panel. Secure side panel to side strip and base
panel in 6 places.
Repeat for RH side panel (Item 5). Place rear
panel (Item 6) in behind folds on side panels and
base panel. Secure rear panel using screws
9 off.
3.
Place top panel (Item 7) onto assembly. Ensure
all other panels sit behind folds on top panel.
Secure top panel 9 places around edge and 1
screw on the top in the centre passing through
hole in top strip as shown.
PYROTECH ZERO CLEARANCE MODEL
Fit Zero Clearance Kit to unit as shown below:
ITEM 2
ITEM 5
ITEM 6
ITEM 4
ITEM 1
ITEM 3
ITEM 7
11
