14
NOTE:
This machine is equipped with 2 selectable
power/pressure levels. See table below for detailed specs.
9. When re-starting the motor, always keep the trigger
pressed.
NOTE:
T
he motor only runs when the trigger is operated
and shuts off when the trigger is released .
Using the Nozzles
Before beginning any cleaning task, install the spray nozzle
firstly.
CAUTION!
NEVER
change nozzle without locking
the safety lock on the trigger handle.
WARNING!
High-pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons,
pets, live electrical equipment, or the appliance itself.
To connect a nozzle to the spray wand:
1. Turn off the pressure washer, remove the bucket or shut
off the water supply, Pull the trigger to release water
pressure.
2. Lock the safety lock on the trigger handle by pushing on
the safety lock until it clicks into the slot.
3. Pulling the quick-connect collar backwards, at the same
time, snap the desired nozzle onto the quick-connect
collar (Fig 20).
To disconnect a nozzle from the spray wand once the
cleaning job is complete:
4. Turn off the pressure washer and remove the water
bucket/shut off the water supply. Pull the trigger to
release water pressure.
5. Lock the safety lock on the trigger handle bu
pushing on the safety lock until it clicks into the slot.
6. Remove the nozzle by placing your hand over the
nozzle while pulling back on the Quick-Connect
collar.
WARNING!
Do not make changes to the
nozzle while the trigger is engaged. Doing so could
result in damage to the pressure washer or injury to the
user.
Working with Detergents
When cleaning with the pressure washer, some cleaning
tasks can be solved with water alone ,but for most tasks
cleaning with detergent allows for more effective dirt
removal.
WARNING!
Use only detergents specifically
designed for use with pressure washers.
DO NOT USE
household detergents, acids, alkaline solutions, bleaches,
solvents, flammable material, or industrial grade
solutions. These could damage the pressure washer.
Many detergents may require mixing prior to use.
Prepare the cleaning solution as instructed on the
solution bottle .
1. Remove the spray wand attachment from the trigger
gun.
2. Remove the soap dispenser sprayer from the bottle
and fill with mixed detergent. Put the spray back on
when finished (Fig 21).
Power
Rated flow
Rated pressure
Low
2.0 L/min
30 bar
High
3.0 L/min
50 bar
