7
2.
Connect the garden hose with a
standard quick coupling
1. Attach the high pressure hose to the
trigger gun and machine.
Detach the high pressure hose by
pressing the pawl (A) or button (B)
1.
Push the lance into the trigger gun
2.
When inserted turn it.
Caution:
Make
sure the lance is properly fixed to the
gun
3.
Attach the nozzles.
Caution:
When attaching the nozzle the
button (A) on the nozzle should come
out again. Check before activating the
trigger that the nozzle is properly fixed.
An ordinary 1/2" garden hose of min. 10
m and max. 25 m will be suitable.
IMPORTANT!
Only use water without any
impurities. If there is a risk of sand
particles in the inlet water (i.e. from
your own well), an additional filter
should be mounted.
1.
Let the water run through the water
hose before connecting it to the
machine to prevent sand and dirt
from penetrating the machine. Note:
Check that the filter is fitted in the
water inlet pipe and that it is not
clogged up.
2.
Connect the water hose to the water
supply by means of the quick
connector
(inlet
water,
max.
pressure: 10 bar, max. temperature:
40°C).
3.
Turn on the water.
3.4 Water connection
2
A
1
3
3.3 Mounting of lance and nozzle
A
B
3.2 Mounting of high pressure hose
EN
