6
The finished handle should be:
SAFETY DEVICES
The unloader valve can reduce
pressure if it exceeds pre-set values.
Locking device on trigger gun (see
illustration at the beginning of this
manual): The trigger gun features a
locking device. When the knob is
activated, the trigger gun cannot be
operated.
THERMAL SENSOR
A thermal sensor protects the motor
against overloading. The machine will
restart after a few minutes when the
thermal sensor has cooled.
This section will explain in details how
to make high pressure washer ready for
use.
Install
the
handle
as
following
instruction.
Install the finish handle into the
machine as following
1.
Screw the water inlet coupling tight
on to the water inlet Note: The inlet
filter must always be fitted in the
water inlet pipe to filter out sand,
lime stone and other impurities as
these will damage the pump valves.
Caution:
Failure to fit the filter will
invalidate the guarantee.
3.1 Connection of garden hose
3. Operation instructions
2.1 Mounting of handle
2. First time instructions
E
E
E
N
N
N
2.2 Handle installing
1. Safety instructions