www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
9
69
-
41200
-
IM
-
AA
Use of a stubby wrench with a ratcheting
head is recommended.
Torque to 20 ft
-
lbs.
You may need to use a crows foot wrench
head and extension to gain access for the
torque wrench.
Raise suspension using the jack while
lining the
upper strut extension
up with
the bolt holes on the strut tower. Use of a
helper will aid in the installation. Install
the strut assembly to the strut tower
using the
provided 3/8
-
16 bolts
.
Once all three bolts have been started,
torque to 30 ft
-
lbs.
Install the
provided sway bar bracket
to
the strut using the
provided M12 nuts,
bolts, and washers
.
Torque to 30 ft
-
lbs.
Install the
factory sway bar end link
to the
bracket using the
factory hardware
.
Torque to 30 ft
-
lbs.
