www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
8
69
-
41200
-
IM
-
AA
Remove the upper sway bar end link from
the strut to allow more room for the
suspension to travel.
Retain factory hardware.
Support the lower control arm with a
support jack.
Remove the 3 upper strut bolts from the
strut tower.
Retain factory hardware.
Lower the jack to allow the suspension to
droop out. Make sure that the brake lines
and ABS wires are free and clear from any
obstruction.
Install the
provided strut spacer
onto the
strut mount using the
factory hardware
.
This is a tight fit to get the strut spacer
and bolts into place. Use of a pry bar may
be needed for placement of the strut
spacer. The top hat can be rotated to
access the bolts. Once all have been
started, tighten all down.
