Page
4
of
13
DO NOT
use the unit with a damaged
charging cord or plug. If vacuum is not
working as it should; has been dropped,
damaged, left outdoors, dropped into water,
contact ReadiVac
®
for instructions.
DO NOT
drop or throw the unit. Treatment of
this type can cause damage to the
components and create hazardous conditions.
Use extra care when cleaning on stairs or
ladders.
CHARGING INSTRUCTIONS:
WARNING:
Use the charging transformer and charging dock (base) supplied with this ReadiVac
®
product.
Failure to follow these instructions may result in fire or serious bodily injury.
1) Insert the adaptor into the main socket located on the lower area of the handle. Always
make sure that the vacuum is turned OFF before connecting the charging adaptor.
2) Place the vacuum into the charging dock* (optional). Ensure that it
‘seats’ properly onto
the charging pin.
3) Plug the power adaptor into an electrical wall outlet. The LED light(s) will begin to
flash indicating the Storm is
‘seated’ properly in the charging dock (optional).
4) Charge the product for at least 6 hours before its first use.
5) Average full charging time is 6 - 10 hours from fully discharged condition.
6) Once fully charged, each of the 3 LED lights will be a solid BLUE color
When the
unit’s batteries are fully charged, the charging transformer will internally turn off and stop charging the
batteries even though the
LED’s on the unit are on and blue; this minimizes electrical consumption while the
ReadiVac
®
product is plugged in to charge. Once battery voltage drops below a full charge voltage the charger
will begin charging the batteries again.
The charging components are CEC (California Energy Commission) compliant and are registered.
OPERATING INSTRUCTIONS:
WARNING:
DO NOT
pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Failure to follow these instructions may result in serious bodily injury.
1) To use the vacuum, press and release the soft touch
“On/Off” button switch (
#
5). To turn the unit OFF when
finished cleaning, press, and release the soft touch
“On/Off” button switch again.
2) For wet pick-up, suck water or other liquid into the dust tank (
#
1) ensuring not to exceed the MAX fill line denoted
on the side of the dust tank. DO NOT exceed beyond MAX fill line, motor can be damaged voiding warranty.
3)
NOTE:
Do Not Press the Dust Cup/Tank release button (
#
3) unless the unit has been turned OFF and you are
ready to empty the container.
Note:
When the dust tank is filled with
liquid always carry it with the nozzle
pointed down and the handle upwards.
Empty all liquid from dust tank when
finished. DO NOT store or place vacuum
on charger base with liquids still in dust
tank. This action will damage the motor,
internal electronics and void the warranty.
Optional
