UNPACKING AND INITIAL ASSEMBLY
14
Tow bar assembly
1
2
3.1
3.2
4
1.
Use both bars (left and right) and the bar extension to assemble the
tow bar. Make sure the bar with the Reacha logo is on the right side
(see picture 1)
2.
Guide the bar extension with the holes upwards into the respective
straight
end of the bars. Let the bar extension go up a few holes
without closing the snap-locks, so that the tow bar can be adjusted
flexibly in the next step.
3.
Insert the two curved ends of the tow bar with the snap lock open
onto the tube ends of the mainframe. (Picture 3.1)
