UNPACKING AND INITIAL ASSEMBLY
16
General on quick releases
The wheel mount is optimized for use with quick releases. These are
already included in the supplied wheels.
However, wheels with lock-nuts can also be used. If you want to mount
your own wheels, use only those which correspond with the above
mentioned specifications.
A quick release essentially consists of two operating elements:
▪
The hand lever (A) on one side of the hub: it converts the closing
movement into clamping force via a lever.
▪
The lock-nut (B) on the other side
Wheel assembly with quick-releases
Place the prepared frame with the wheels on the floor.
B
A
