Copyright © 2006 REA Elektronik
Seite 4
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
5
Safety notes
This manual does not claim to contain all necessary
information for safe of the system. There could be more
information relevant in the respective country.
Before operating the system carefully read the manual.
When working on the system it is mandatory to protect
from consumables (ink, solvent) which can injure eyes
and skin.
Relevant information can be taken from relevant
material safety data sheet.
Manipulating the pneumatical, electrical and/or
hydraulical circuits can lead to severe injuries and death
in particular cases.
Changes of specific components are subject to be
carried out by REA staff or REA representatives only.
Please check all system components and hoses on a
regular basis for leakage. In case of a leakage the
system has to be turned off and repaired. In a case like
that please get in touch with REA service department
for support.
Please check all existing connecting lines (electric,
hydraulic, pneumatic) as well as fittings on a regular
basis. Should any components be damaged or should
not be safe anymore make sure to shut the system off
and eliminate the failure.
In a case like that please get in touch with REA service
department for support.
Should a system be taken out of operation for a longer
period of time make sure to flush the system using the
adequate cleaner before putting it back into operation
(see also chapter 9.3 Flushing of print head).
