Copyright © 2006 REA Elektronik
Seite 2
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
2
Proper use of equipment
The REA-JET print head (following: print head) is designed to process low viscosity liquids. Only
REA authorized inks and cleaners are allowed to be used within the print heads.
The print head can only be operated with REA-JET hardware and software. The use of any
equipment, parts or components that are not REA admitted within the REA-JET coding and
marking system the operator has to bear the responsibility for doing so.
The print head is factory adjustedand does not need any additional calibration by the operator (
see
also under 5 Safety notes
).
For any unintended use of the REA-JET systems the operator carries the responsibility. REA can
not take over any seller´s warranty for damage caused by unintended use of the system.
The present equipment is not meant for use in any explosion hazardous environment.
3
Improper usage of equipment
The coding system is not designed to be operated as a handheld device.
It is forbidden to splash any of the inks or solvent on any persons or living creatures.
The use of any not REA tested and REA approved substances within the REA-JET systems
represents an improper use for which REA Elektronik excludes to take over any liability.
