Microphones
1
5
2
6
3
7
4
8
lider
deputy
Setting of any priorities configuration: switching of any
switches in any channel's programmer causes the setting of
priority precedence of this channel over the previous
chosen channel. For example: switching in channel no 1
programmer, the switch no 4 down (ON) causes that
microphone no 1 can stop work of microphone no 4.
Lower configuration (picture no 3) shows the setting of the
priority for the microphone no 1 and no 2 (picture no 2).
The microphone no 1 has the priority over the
microphones from 2 to 8, and the microphone no 2 has the
priority over the microphones from 3 to 8, but is
subordinate to the microphone no 1. It means, that the
speeches of the microphones 3-8 can be stopped in any
time by the leader (1) or his deputy (2), but the speech of
the deputy (2) can be stopped only by the leader (1).
Pict. 2
1
5
2
6
3
7
4
8
ON
1
1
1
1
1
1
1
5
5
5
5
5
5
5
2
2
2
2
2
2
2
6
6
6
6
6
6
6
3
3
3
3
3
3
3
7
7
7
7
7
7
7
4
4
4
4
4
4
4
8
8
8
8
8
8
8
ON
ON
ON
ON
ON
ON
ON
1
2
3
4
5
6
7
8
Pict. 3
13
Programmer of channels(1-8)
- default settings: All switches in the top position (OFF). Used to set the superiority of
microphones.
7. Prioritys.
1 2 3 4
ON
Programmer nr 4
- default settings: switches 1 and 2 in position (OFF), switches 3 and 4 in position (ON).
Switch 1
- OUT2 PRE/POST GATE
: upper position (OFF) POST GATE - all channels for MAINSUM-2 are assigned
to the automatic. Bottom position (ON) PRE GATE - signals are assigned before automatic.
Switch 2
- AUTO/MANUAL
: upper position (AUTO) - mixer auto work function; bottom position (MANUAL) -
standard mixer work.
Switch 3
- ATTENUATION OFF
: inactive microphone mute Settings, upper position - completely mute;
bottom position - mute -15 dB.
Switch 4
- LAST MIC
: upper position (OFF) - recently used microphone turns off after speaking,
bottom position (ON) - recently used microphone is still active after the speaking.
ATTENTION! If you want to use a priority, this feature must be disabled (upper position OFF).
Programmer nr 4
1
5
2
6
3
7
4
8
ON
Programmer nr 1
top position OFF
bottom position ON
L
.M
IC
A
T
T
E
N
.
M
.A
U
T
O
O
U
T
2
P
.
1
5
2
6
3
7
4
8
ON
TIME-backup time control of active microphones
ATTACK- switching Microphone level control switch
Programmer nr 1
- default settings: all switches (1-8) in the
top position (OFF).
Switching any of the eight switches to the bottom position
(ON) turns off the automatic in each channel. This is useful if
you want to use one channel as a linear channel (music).
ATTENTION
! If you want to use priorities, the channel switch
must be in the top position (OFF).
1
5
2
6
3
7
4
8
ON
Programmer nr 2
(MAINSUM 2)
Programmer nr 2 -
assignment of input channels 1-8 to the output channel mix 2 (MAINSUM 2).
Assigned to input 2 (IN2) in the DSP and the output jack socket (MIX OUT).
Programmer nr 3
(MAINSUM 1)
Programmer nr 3 -
assignment of input channels 1-8 to the output channel mix 1 (MAINSUM 1).
Assigned to input 1 (IN1) in DSP.
Adjusting the sensitivity of the channel LINE-CD
1
5
2
6
3
7
4
8
ON
programmer channels 1-8
Pict. 1
Содержание AMWL-9DSP4/400
Страница 2: ......
