L
ower configuration (pict. 4) shows the situation for three microphones, where each of them has the priority to two
ones left. In such a configuration, the priority goes to that microphone which is activated as the first one. So, when
he speech to tsomebody starts speaking to microphone no 2, the microphones no 1 and 3 are not active till the end
of the microphone no 2. Microphones no 1 and 3 behave analogically. Such a configuration is possible for all eight
microphones. Thanks to that, there is a situation, where only one microphone is always active and it makes
impossible for somebody else to interrupt, what is valuable for the order of the conference
1
5
2
6
3
7
4
8
ON
1
1
1
1
1
1
1
5
5
5
5
5
5
5
2
2
2
2
2
2
2
6
6
6
6
6
6
6
3
3
3
3
3
3
3
7
7
7
7
7
7
7
4
4
4
4
4
4
4
8
8
8
8
8
8
8
ON
ON
ON
ON
ON
ON
ON
1
2
3
4
5
6
7
8
Pict. 4
13
8.
Configuration and operation of the amplifier with additional power terminal
(AMWL-9DSP/400+100).
AMWL-DSP4 amplifiers have an additional 100W power terminal (option), where
the delay can be set.
100 W terminal can be switched on output
DSP OUT 2 [28],
DSP OUT 3 [27] or DSP OUT 4 [19].
It is the switch inside the amplifier. Red arrow in the picture on the right, shows where it
is. The switch is described as the DSP outputs 1-4.
DSP OUT 1 [21],
The picture shows the typical use of the amplifier in that version
The main power terminal operates on one loudspeaker’s circuit
(red colour) but the other circuit (blue color)loudspeakers are
spaced. Then, it is possible to adjust demanding delay on the
DSP additional 100W power terminal, which operates on this
loudspeaker’s circuit. The additional 100W circuit can also be
activated via connector INFO OUT PRESET 2. This means
that for Preset 1, which is activated when for example in the
church are "little people" the additional 100W circuit is inactive
(break on connector INFO OUT PRESET 2). However, when
in the church are a "lot of people" for enabled Preset 2, the
additional speaker circiut 100V is activated.
An example of the AMWL-DSP4/400+100
amplifier use
SACRYSTY
AMP.
1
3
m
Содержание AMWL-9DSP4/400
Страница 2: ......
