CALIBRATION
29
6.4
CAL mode 3 (Print Setup)
6.4.1
Enter CAL Mode 3
Press the button and power-on the instrument (Fig.24). Press to
select the channel.
6.4.2
Set Print Mode (channel 1)
“
REC
” Automatic printing (ref. section 4.4 - Fig.13)
“
ROLL
” Automatic printing (ref. section 4.4 - Fig.14)
“
ENT
” Automatic printing after each bucket weight is entered.
“
OFF
” No automatic printing after clearing the last load, but allows manual
printing via the button.
Press to toggle.
FUNCTION
Print Heading
Cal Factor Adjustment
Handshake (RTS/XON)
Print Mode
-
-
CH
1
2
3
4
5
TOTAL
Figure 25 : Enter CAL Mode 3
